Subscribe To Newsletter
1. The body length becomes shorter, which is about 112mm, equal to 268C.
2. The Built-in Image Buffer (memory storage) is adjusted to 1GB
compared to 2GB in QHY600PH/Pro, which can guarantee memory
requirements still.
Other specifications of QHY600L keep the same
with QHY600PH except the body length and weight.
|
QHY600 FULL FRAME FORMAT SCIENTIFIC CMOS CAMERA SPECIFICATIONS
|
|
| Model | QHY600 PRO (Professional Version, previous name QHY600U3G20) QHY600 PH (Photographic Version,previous name QHY600U3) QHY600 PH-L （Photographic Liet Version） |
| Image Sensor | SONY Full Frame BSI CMOS Sensor IMX455ALK-K (Industry Grade) This sensor is available in both -C (consumer grade) and -K (industry grade). General speaking the -K version has longer lifetime than the -C version. Currently ,both the monochrome QHY600 Photographic version and monochrome QHY600 Professional version use the -K version of the sensor. |
| Pixel Size | 3.76um x 3.76um |
| Color / Mono Version | Both Available.QHY600U3G20M and QHY600U3G20C |
| Sensor Surface Glass | AR+AR Multi-Coated |
|
Sensor Type
|
Back-Illuminated (BSI)
|
|
Effective Pixels
|
61.17 Megapixels
(9576*6388 effective area. 9600*6422 with overscan and optically black area) |
|
Effective Image Area
|
36mm x 24mm
|
|
Full Well Capacity (1x1, 2x2, 3x3)
|
Standard Mode
>51ke- / >204ke- / >408ke- Extend Full Well Mode >80ke- / >320ke- / >720ke- |
|
A/D
|
16-bit (0-65535 levels) at 1X1 binning
18-bit at 2X2, 19-bit at 3X3, 20-bit at 4X4 software binning
*QHY600 uses the software digital binning for 2*2binning. With digital sum, 2*2binning will be four 16-bit summed then it is 18-bit. |
|
Sensor Size
|
Full Frame Format
|
| Frame Rate |
USB3.0 Port Image Transfer Speed
Fiber Port Image Transfer Speed (QHY600U3G20 only)
|
| Read Noise | 1.0e- to 3.7e- (Standard Mode) |
| Dark Current | 0.0022e-/p/s @ -20C 0.0046e-/p/s @ -10C |
| Zero Amplifer Glow | Yes |
| Exposure Time Range | 40us - 3600sec |
| Firmware/FPGA remote Upgrade | Supported. Via Camera USB Port |
| Shutter Type | Electric Rolling Shutter |
| Computer Interface | USB3.0 / 2*10 Gigabit Fiber Port (2*10Gigabit Fiber Port is a feature of the professional version only and needs the QHYCCD PCIE Graber card. In the early bird version the hardware is disabled. It can be enabled in an upgrade to the professional version in the future) |
| Hardware Frame Sequence Number | Supported |
| GPIO |
(Professional Version Only) 4PIN, high speed with flexible FPGA conntrol. |
| Built-in Image Buffer | 1GBytes（8Gbit）/ 2GBytes（16Gbit）DDR3 memory |
| Non-volatile memory / On camera storage | Build-in total 64MByte Flash Memory. 10MBytes user-accessible space for stellar ROI frames for analysis of exoplanet investigation, occultations, atmospheric seeing measurement, focus, optical analysis, etc. Supports 100*100 image x 500 frames, 50*50 image x 4000 frames, 25*25 image x16000 frames, 10*10 image x 250000 frames |
|
Cooling System
|
Dual Stage TEC cooler:
- Long exposures (> 1 second) typically -35C below ambient - Short exposure (< 1second) high FPS, typically -30C below ambient QHY600 Water Cooling Version - Long exposures (> 1 second) typically -45C below ambient |
| Water Cooling Version | QHYCCD can offer this version. Contact QHYCCD or Dealer before order this version QHY600 Water Cooling Version - Long exposures (> 1 second) typically -45C below ambient |
|
Anti-Dew Heater
|
Yes
|
|
Telescope Interface
|
M54/0.75
|
| Optic Window Type |
AR+AR High Quality Multi-Layer Anti-Reflection Coating |
| Power | 40W/100% 20W/50% 13.8W/0% |
|
Back Focal Length
|
17.5mm (±0.2)
(A special short backfocus front piece is available as an option. It provides is about 7mm B.F.L. Contact QHYCCD if you need this version) |
|
Weight (net)
|
Scientific Professional Version : 965g *
Amateur Photographic Version: 850g* Special Short Backfocus Version ：870g* Photographic Liet Version ：790g* *Not including the M54/0.75mm center/tilt adjust ring)
|
| Free Shipping | No |
|---|
